Tips & tricks & After care
Tip & tricks from 2ONN Beauty herself
Here you will learn about all my Tips and tricks that I use to apply & keep my lashes on for more then 5 days.
Application:
• Step 1: Prime Your Lash Apply a thin coat of our special bond to the base of your natural lashes(A little goes a long way ) Let it dry for 30-60 seconds. For extra hold, apply it directly to the lash segment
• Step 2: Lash Out!: Place our cluster lashes underneath your natural lashes 1-2m away from your water line, starting from the middle, outer corner, or inner corner - wherever you like!
• Step 3: Lock It In Use our applicator to press the lashes together, securing them in place.
• Step 4: Seal the Deal: Brush our lash sealer underneath the cluster lashes & apply on the applicator and clamp down on the lashes to keep them in place and make them last.
•Step 5: All Done! In just a few minutes, you've got luscious lashes that will last up to 7 days or more with proper care!
• Mix and match our clusters & lengths to create your
Removal:
•1. Apply Remover: Coat the top and bottom of the lashes with our remover, keeping your eye closed to prevent any irritation
•2. Brush Down: Use the remover applicator to gently brush down the lashes, starting from the top. Be patient, as the oil will gradually soften the bond.
•3. Slide Off: The cluster will slowly detach from your natural lashes without causing damage.
•4. Residue Removal: Apply the remover once more to remove any remaining residue.
• 5. Final Cleanse: Use makeup remover or micellar water to wipe away any leftover residue. Wash your natural lashes with water and dry them thoroughly.
Remember to be gentle and patient during the removal process to ensure the safety and health of your natural lashes
Tips & Tricks & Aftercare:
For a flawless application, follow these steps:
•Application- Use an applicator (or a tweezers alternative) for precise placement
•Apply Remover to your Bottom lashes to prevent your top & lower lashes from sticking together when placing on lashes.
•After applying clusters recommend to wait for at least 5 mins so the glue can dry.
•Locking in your set. -Apply Sealant into your applicator then clamp down on the cluster lashes to lock in and extend wear.
Aftercare
•Cleaning & maintaining your lash tools & essentials-Clean the applicator thoroughly after use
•Wipe the rim of your bond & seal to prevent the product drying on the rim & to make it easier to open on your next application
•Dont wash your lashes for the first 24hrs and that can result in them getting loose or coming off
•Spoolie your lashes after you have used the bond and Sealeant to keep them fluffy
•For longer wear don't directly put your lashes under the water specially hot for too long this can result in them becoming loose or coming off
•loose lashes - if they are becoming loose grab your applicator & clamp them apply Sealeant & seal the deal!!
Reusing lash clusters (our clusters are reusable up to 2-4 times if cleaned and care for properly)
•Add Micellar Water to a Bowl (or rubbing alcohol - person preferences)
-Add in Used Clusters
-Mix in Solution of choice (as per above)
let soak for 10-15 mins
-Place lash Clusters on paper Towel & use cotton bud or spoolie
-Brush away from the lash's only gently brushing away the bond on the band
-Let dry then use spoolie to fluff them back up
Reccomended : Please do an patch test with a bond and Sealeant before applying to lashes if there is any reactions please wash the area where test was appiled
if it becomes worser contact your local doctor straight away.
Theses Tips & Tricks are my own personal preferences it makes it easier every time & can be used for all DIY Clusters